Re:Zoomer Modem Cable
TDG32@aol.com
Tue, 27 Jun 1995 23:19:52 -0400 (EDT)
If your handy, Ohm out each lead end to end first, then even if you cut the cable and the leads are not color coded you will know where they go. I realize that the Zoomer end is small, but with a good set of probes it is possible. Hope this helps.
P.S. I have been considering cutting off the D25 end and crimping on a RJ45 (8 pin modular phone type plug), this would allow me to change between 9 and 25 pin and DCE/DTE interfaces easily. Radio Shack sells 9 or 25 pin to RJ 45 kits for about 5 bucks.