Unfortunately, the enclosed documentation only gives installation
instructions (which affect autoexec.bat and config.sys) for the HP95LX
and not for zoomies.
I managed to get the card recognized by modifying b:\config.sys to add the
line:
device=c:\stacker.drv /p=0 c:
and 'file manager' now shows drive "C" with 9.8mb.
Questions:
1) Does anyone currently using Stacker know the optimal options to use (no
documentation on Stacker was included)?
2) When I boot my zoomer, 'file manager' shows an "E" drive on the drive list
but I get an "unformatted drive" msg when I try to pick it. Is this
normal or is there some way to remove "E" (or make it usable)?
The 'unformatted drive' msg also shows up at other times apparently when
the unit wants to poll the drives for file operations. Somewhat tedious.
----------------------------------------------------------
Longden C. Loo lloo@world.nad.northrop.com
Northrop Grumman Corporation Information Services
8900 E. Washington Blvd. Phone: (310) 948-7865
Pico Rivera, CA 90660-3783 FAX: (310) 942-5300
----------------------------------------------------------